560-10A Shore A Digital Hardness Meter Durometer 0~100HA, Rubber Tire with LCD Display Pocket Size Tester


Quantity
  OR  


Model : 560-10A

Shore A Digital hardness testers are used to measure the hardness of rubber and plastics according to ISO 868-1986 and ISO 7619 and can be use as portable or desktop. It has 8.1N total measure force, 1kg outside pressure, pressure needle top cone angle of 35°, 2.5mm needle length, 0~100HA dial scale and and features large LCD display for easy reading.

It corresponds and meet the rigorous standards of ISO 868-1986 for Plastics and Rigid rubber and ISO 7619 Rubber in measuring indentation's hardness as well as GB/T 531.1-2008 standard. Particularly in the materials technology hardness plays a huge role. The measured hardness of a body makes possible conclusions on its characteristics e.g. about how quickly it breaks or is being scratched.

Type A durometers is applicable to test the penetration medium hardness of rubber, plastic, leather, multi-grease, wax, etc.

NOTE:

  • A minimum thickness of 6mm as sample test probes is recommended for

    measurement's optimal results (if its less you may add more layer but

    should be not more than 3 layers) and measuring point of at least

    18mm distance from the outside edges.

  • It is recommended that measurements be made with the type D 

    durometer when the value is above 90 HA



Features:

  • Wide measuring range with high resolution and ease of operation

  • Hold Function, holds measured value in test

  • With Zero setting

  • Clear test value

  • Dial Scale is 1-100HA

  • High grade probe with 0-2.5mm Pointer journey

  • Stress at the end of pointer: 8.1N

  • Small in the dimension, lightweigt and can easily be transported

  • 35º included angle with 0.5HA resolution

  • Delivers ultra accurate reading with no guessing error

  • Easy to read large LCD display

  • Battery operated

  • Passed and conforms with ISO 868-1986 & ISO 7619 international standards

  • Comply with GB/T 531.1-2008 standard

  • Maintenance-free digital display

  • With CE Marking, conforms with European health & safety requirement

  • Type A durometers is applicable to test the penetration medium hardness of rubber, plastic, leather, multi-grease, wax, etc.

     

    NOTE:

    • A minimum thickness of 6mm as sample test probes is recommended for

      measurement's optimal results (if its less you may add more layer but

      should be not more than 3 layers) and measuring point of at least

      18mm distance from the outside edges.

    • It is recommended that measurements be made with the type D 

      durometer when the value is above 90 HA

 

Specifications:

  • Resolution: 0.5HA

  • Total measure force: 8.1N

  • Outside pressure: 1kg

  • Pressure needle top cone angle of 35°

  • Needle length: 2.5mm

  • Flat cone point: φ0.79mm diameter

  • Dial Scale: 0~100HA

  • On/Off Switch


 Set includes:

  • 1 x Shore A Durometer

  • 1 x Instruction Manual
  • 1 x Hard carrying case with hardened foam for maximum shock absorption while in transport